Hiperlink CPE AC ATRH0595 born as the optimal completion for our Hiperlink Base Station AC. It’s also compatible with the Hiperlink Base Station classic.
Hiperlink CPE AC ATRH0595 born as professional dual polarization CPE with an high gain (23 dBi) integrated antenna and reliability, dedicated to the Carrier, Network Operators, WISPs, and Public Administrations.
Hiperlink CPE AC ATRH0595 is entirely designed and engineered in Italy by SICE . The case is the result of a process of high quality aluminum casting, while the antenna 23 dBi gain is the result of a project that uses Fixed Technology to maximize gains in dual polarization.
Thanks to the presence of a discharger, integrated on ethernet side, the CPE has a higher resistance to the typical surges of home networks.—Hiperlink CPE ATRH0595 AC power is a standard passive 18V PoE.
The software provides great flexibility and allows you to completely control the device. The software provides in fact modern features as latest generation VPN, Data Security, Encryption, IP assignment, Software Update remotely , PPPoE authentication, firewall (NAT, Filtering, QoS) and SNMP Agent. And it can also create bridged (layer 2) or routed (layer 3) networks.
Hiperlink CPE AC ATRH0595 is widely used in the wireless network for Wireless Internet Service Providers, Urban Security and Videosurveillance, Carrier, Military, Public Administration, University and Disaster Recovery.
Urban Security and Surveillance
WISP (Wireless Internet Service Provider)
Point-to-Multipoint private Wireless Networks
Emergency Backup/Disaster Recovery
Military, Government or Campus
Alternative to wireline CDN,HDSL or Fiber Optics
|Radio module||802.11 a/g/n/ac, 20/40/80 MHz channel width, modulation up to 256qam|
|TX Power||30 dBm EIRP|
|RX Sensitivity||-115 dBm@ 6 Mbit/s ± 1dB (tipical)|
|RF Connector||Integrated Antenna Hi Gain 23dBi; Zero Connection Loss (+3dB RX Signal)|
|Transmit power Management||TPC function - ERC/DEC(99)23|
|Channel management||DFS (Dynamic Frequency Selection), Auto Channel Selection, Radar free. CEPT ERC 70-03|
|Standard Ethernet||802.3 CSMA/CD - Ethernet 10/100/1000 Full Duplex, Autosensing - Auto MDI/MDIX|
|Supply||POE 12/24V VDC (external power supply 110/230 VAC)|
|Protection level||IP68 Alluminium|
|Temperature range||-40°C / + 80°C|
|Pole Support||Max diameter mm 25/55 (adjustment H and V)|
|Mechanical characteristics||320 mm x 320 mm x 65 mm|
|Weight||1,2Kg (with integrated antenna)|
|Bridge||Multiple bridge, RSTP/STP, Bridge firewall|
|Protections Radio||Antenna ground; ESD protection up tp 16Kv|
|Management and Configuration||Telnet client, Telnet server, MAC Telnet server, SSH, SSH on GUI, Http|
|VPN support||IPSEC, EoIP, PPtP, VLAN, L2TP, PPPoE, IPIP, oVPN, SSTP|
|IP assigment||DHCP client, DHCP server|
|Reference standard||En301893, En301489, En60950, RoHS compliant|
|VLAN||802.1q, Multiple VLAN interface, inter VLAN routing, QinQ, Nesting VLAN|
|Software upgrade, Configuration Backup and Restore||Via FTP, Drag'n'Drop directly from Windows OS|
|Wireless Mode||Multipoint Client, Point to Point|
|Wireless Security||Mac-filtering, WEP 64/128bit, WPA/WPA2 aes-ccm/tkip PSK/EAP, Radius Auth, Management Frame Encryption Mac-filtering, WEP 64/128bit, WPA/WPA2 aes-ccm/tkip PSK/EAP, Radius Auth, Management Frame Encryption|
|Security||Firewall with P2P limitation, Mac-address filtering e L7 filtering; Radius server authentication (AAA)|
|Routing||RIP, OSPF, BGP, MPLS, MME, HWMP+|
|Access protection||Multilayer users management|
|Agent SNMP||SNMP V1 client, MIB II, Bridge MIB|
|QoS||WMM, 802.1p, IP ToS RFC791, CBQ Queuing; L7 traffic inspection; Hierarchical HTB; PCQ, RED, SFQ, FIFO queue with burst|