Hiperlink ATRH0513 is a TDMA Outdoor Point-to-Point Ethernet system with high-capacity MIMO technology .It allow to deploy middle and long distance links.
Hiperlink ATRH0513 with its dual Pol 26dBi integrated directional antenna, allows you to create LInks of up to 10km. WITH ATRH0513 it is possible to create networks bridge (Layer 2) or routed (Layer 3) using routing protocols such as OSPF, BGP, MPLS.
Hiperlink ATRH0513 is supplied with the AC/DC Power Over Ethernet (POE) 48VDC. It is also available in 12VDC and 24VDC versions to provide power through batteries or solar cells.
The robustness of the system and the degree of protection IP68 wateproof , allows to install these systems in the most difficult scenarios such as marine environments, high altitude mountains or desert areas. —
latest generation features for VPN Security Data, Encryption, IP Assignment, Software Update and remote SNMP agent Are implemented
Hiperlink ATRH0513 is widely used in network infrastructure for Wireless Service Providers, Security and video urban surveillance, Carriers, Army, Public Sector, Universities and Disaster Recovery.
Hiperlink ATRH0513 is suitable for the realization of high capacity backbones and is able to achieve up to 90 Mbps full duplex with MIMO Technology.
Urban Security and Surveillance
Wireless Internet Service Provider – WISP
Point-to-Multipoint private Wireless Networks
Emergency back up / Disaster Recovery
Military, Government or campus
Alternative to wireline CDN, HDSL or Fiber Optics
|Operational Frequency||4,9-5,85 GHz ( 2.4GHz available)|
|Output power||30 dBm EIRP|
|Sensitivity||91 dBm@ 6 Mbit/s ± 1dB (typ)|
|Antenna||integrated, double polarizatione, 26dBi|
|RF Filters||5 ghz bandpass SICE filter (optional)|
|Channel management and Transmit power Management||DFS (Dynamic Frequency Selection), Auto Channel Selection,Radar free TPC function|
|Standard Ethernet||802.3 CSMA/CD|
|Operational mode||Dynamic Mesh, Static WDS Mesh, Bridging PtP and Mtp|
|POwer supply and power consumption||POE 48 VDC 802.3 af or POE 12 VDC/24VDC 11 W|
|Protection||electronic circuit against overvoltages|
|Protection||waterproof IP68 alluminium die cast enclosure|
|Temperature range||-40°C / + 55°C|
|Pole mounting||for poles mm 40/70 ( H and V setting).|
|Mechanical characteristcs||340 mm x 340 mm x 90 mm|
|Weigh||2,9Kg (integrated antenna); 4,4 Kg (external antenna)|
|Bridge||Multiple bridge interfaces, Protocol can be selected to be forwarded or discarded, MAC Address table can be monitored in real time; RSTP Rapid Spanning Tree Protocol|
|Available external antennas||Direttive Grid, Panel or Dish (different size)|
|Management and configuration mode||Telnet, client, Telnet server, MAC Telnet server, SSH, GUI su SSH, http|
|VPN support||IPSEC, EoIP, PPtP, VLAN, L2TP, PPPoE, IPIP|
|IP protocols||DHCP client, DHCP server|
|Ethernet port||Fast Ethernet 10/100 Full Duplex, Autosensing|
|VLAN||802.1q, Multiple VLAN interface, inter VLAN routing|
|Software update, backup and configuration recover||via FTP with a Drag and Drop directly on the systems folders|
|Security||WPA2 (EAP, AES, TKIP), DFS, TPC, Mac filtering|
|Recover and Fault Tollerant||Watchdog hardware e software con e mail Alert|
|Access protection||Multilayer users management|
|Agent SNMP||SNMP V1 client, MIB II, Bridge MIB|
|QoS||802.1p (Layer2 traffic priority) IPToS RFC791 (Layer3 traffic priority) CBQ Queuing Layer 4-7 traffic shaping Hierarchical HTB QoS system with bursts PCQ, RED, SFQ, FIFO queue; CIR, MIR Contention ratios, dynamic client rate equalizer|