Hiperlink Premium 24GHz base station is a revolutionary point-to-multipoint Mw transceiver designed to work on unlicensed 24 GHz frequency. The system is particularly suitable in high-quality WISP networks and for video urban surveillance. It can also be used effectively for public and private networks in urban and suburban areas. Hiperlink Premium support LAN-to-LAN for data transmission and cost effective solutions for the “digital divide” in rural areas, because its frequency is exempt from any interference of 5 GHz which is saturated in most of the sites.
Hiperlink Premium 24GHz base station can be used in existing networks either where they are realized in bridge mode (Layer 2), whether they are made in routed mode (Layer 3). In this equipment are included routing protocols such as OSPF, BGP, and MPLS.
Hiperlink Premium 24GHz base station base station is designed for extreme weather conditions and is powered by 12-24VDC.
Hiperlink Premium 24GHz base station has been specially designed with sophisticated demodulation circuits that allow the device to have a high sensitivity reception.
Hiperlink Premium 24GHz base station can be used for urban video surveillance networks ; WISP networks; private networks, data and LAN-to-LAN interconnections. It simplify Solutions for the digital divide in rural areas; IP connections to Utilities networks (gas, electricity, railways).
Wireless Videosurveillance networks
WISP, WiMAX and Military backhauling
2G/3G/4G mobile infrastructure
Ethernet Links 10/100/1000 Mbps
Last Mile Fiber Extension
Broadcast Radio & TV backhauling
Private Data Network & Fiber Optics Disaster Recovery
Pubblic Networks (Airoports, Railways, oil&gas etc.)
Airports (RADAR, ATC, ADS-B, etc.) and portual networks (VTS, Surveillance)
|Operational Frequency||24,050-24,250 GHz|
|Radio module||802.11a/n/ac, 20/40/80 MHz channel with modulation up to 256 QAM|
|Output Power||20 dBm EIRP|
|Sensitivity||-97dBm@6Mbit/s ± 1dB (typ)|
|Antenna||Integrated 28 dBi, aperture 45°, Circular polarization|
|Channel management e Transmit power Management||Auto Channel Selection,Radar free TPC function|
|Operational Mode||Dynamic Mesh, Static WDS Mesh, Bridging PtP and Mtp, Routing|
|Power Supply and Power consumption||POE 48 VDC 802.3 af or POE 12 VDC/24VDC 12 W|
|Protection||Built in surge arrestors|
|International Protection||water proof IP68 Alluminium die-cast|
|Temperature Range||-40°C / + 55°C|
|Pole mounting||40/70 mm poles ( H and V setting).|
|Mechanical Characteristics||320 mm x 320 mm x 65 mm|
|Bridge||Multiple bridge interfaces; Layer 2 Filtering and QoS, RSTP/STP Spanning Tree Protocol|
|Management and configuration mode||Windows GUI (Via Mac or linux emulator ), Telnet, MAC Telnet, SSH, HTTP|
|VPN support||IPSEC, EoIP, PPtP, VLAN, L2TP, PPPoE, IPIP|
|Routing protocols||OSPF, BGP, MPLS/VPLS, RIP|
|Ethernet Port||Gigabit Ethernet (10/100/1000 Mbps)|
|Ethernet standard||802.3 CSMA/CD|
|VLAN||802.1q, Multiple VLAN interface, inter VLAN routing|
|Advanced functionalities||Scripting and scheduling support, Netwatch, DHCP, Email, routing Policy, Traffic shaping & balance, Router Redundancy Protocol|
|Ricover and Fault Tollerant||Watchdog hardware and software con e-mail Alert|
|Security||Encryption and Authentication via WPA2, WPA, WEP AES-CCM & TKIP Encryption; Integrated Firewall; INTEGRATED ROUTER; Peer to Peer protocol limitation; MAC-ADDRESS authentication & filtering; IP address filtering & protocol filtering; RADIUS server Authentication (AAA), TPC.|
|Access protection||Multilayer users management|
|Agent SNMP||SNMP V3 client, MIB II, Bridge MIB|
|QoS||802.1p (Layer2 traffic priority), IPToS, CBQ Queuing, Layer 4-7 traffic shaping, Hierarchical HTB QoS system with bursts, PCQ|RED|SFQ|FIFO queue, CIR|MIR Contention ratios|